|By Don MacVittie||
|January 20, 2013 10:00 AM EST||
When you purchase a high-end storage array, it is not generally advised that you half fill the racks and then forget about it, purchasing a new empty rack to fill when next you need high-end storage.
Knowing how the firmware is configured on a BIG-IP, we can chat about some of the more interesting aspects of hardware, firmware, and devices overall. One of the truly interesting bits to me is the proclivity of many organizations to purchase a high-end, bladed ADC system and not fill the rack. I remember way back in the day when my cohorts in the networking and storage (FC SAN) spaces had to worry about the backplane on a switch and how much it could actually handle compared to the sum of the ports you could put on the front. But that isn’t as much a concern with ADCs (or much of anything else these days), purpose-built devices tend to have plenty of bandwidth on the backplane, and you don’t buy an ADC based off of commoditized hardware that you expect to drop blades into.
But there are a reasonably large number of organizations that have purchased a bladed ADC and then either done nothing more with it than the original purpose, or gone out and bought separate ADCs (normally from the same vendor!) to do new tasks.
And the question there is… Are you really maximizing your infrastructure that way?
We are going through a whole cycle of storage consolidation because our storage needs were met in this manner. There was corporate storage, divisional storage, departmental storage, and in many places team storage, all growing at the same time with no oversight and lots of “we’re completely out of space” at one level while another was overflowing.
We, as an industry, need to apply the lessons learned there to our usage of ADCs. Sure, you might have purchased that blade rack for project X, but when you kick off project Y, do you really want to purchase all new hardware, or could you drop a couple of new blades into the rack and use any of the methods various vendors offer to partition off those blades as separate entities? Of course you could. And it would normally be more economically feasible. Of course there are cases where you can show going a different route might cost less, but there are some other considerations to be made. Like power consumption of a whole new device versus a blade, and management of a whole new device versus another interface on an existing device, and of course the cost of setting up and configuring a whole new device versus utilizing the configuration already in place for the other blades and modifying it.
From the F5 perspective, we have attempted to minimize the pain of an all-new configuration with iApps, a very cool feature that handles the details for you, but they won’t initially configure the device, and blades will do a lot of that configuration for you. Indeed, if you are just expanding the capacity of an existing environment, that is automatic. Only if you’re doing new things – new apps, new ADC functionality, new segmentation – do you have to do configuration. If you’re not an F5 customer, you can of course check with your vendor, but I’m willing to bet you’ll have less work putting blades into existing chassis.
And don’t forget that a modern ADC is capable of doing a lot of things. If you’re looking for new LAN/WAN/security/application delivery functionality, check into what can go into your ADC rack while you’re looking at other options. It is entirely possible that the ADC you have could perform the functionality you need, with a single (or simplified) management interface, leaving staff more time to deal with the 10 million other issues that come up in an IT shop in the course of a year. If your ADC is underutilized, it might just be possible that you could start using your ADC for the given purpose with just a license key, saving even more time, and likely some money too.
Cloud Expo 2014 TV commercials will feature @ThingsExpo, which was launched in June, 2014 at New York City's Javits Center as the largest 'Internet of Things' event in the world.
Jan. 31, 2015 03:00 PM EST Reads: 3,565
"People are a lot more knowledgeable about APIs now. There are two types of people who work with APIs - IT people who want to use APIs for something internal and the product managers who want to do something outside APIs for people to connect to them," explained Roberto Medrano, Executive Vice President at SOA Software, in this SYS-CON.tv interview at Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jan. 31, 2015 02:30 PM EST Reads: 2,733
SYS-CON Media announced that Splunk, a provider of the leading software platform for real-time Operational Intelligence, has launched an ad campaign on Big Data Journal. Splunk software and cloud services enable organizations to search, monitor, analyze and visualize machine-generated big data coming from websites, applications, servers, networks, sensors and mobile devices. The ads focus on delivering ROI - how improved uptime delivered $6M in annual ROI, improving customer operations by mining large volumes of unstructured data, and how data tracking delivers uptime when it matters most.
Jan. 31, 2015 02:00 PM EST Reads: 3,889
DevOps Summit 2015 New York, co-located with the 16th International Cloud Expo - to be held June 9-11, 2015, at the Javits Center in New York City, NY - announces that it is now accepting Keynote Proposals. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is no time to wait for long development cycles that produce software that is obsolete at launch. DevOps may be disruptive, but it is essential.
Jan. 31, 2015 01:15 PM EST Reads: 2,698
Wearable devices have come of age. The primary applications of wearables so far have been "the Quantified Self" or the tracking of one's fitness and health status. We propose the evolution of wearables into social and emotional communication devices. Our BE(tm) sensor uses light to visualize the skin conductance response. Our sensors are very inexpensive and can be massively distributed to audiences or groups of any size, in order to gauge reactions to performances, video, or any kind of presentation. In her session at @ThingsExpo, Jocelyn Scheirer, CEO & Founder of Bionolux, will discuss ho...
Jan. 31, 2015 01:00 PM EST Reads: 2,052
“With easy-to-use SDKs for Atmel’s platforms, IoT developers can now reap the benefits of realtime communication, and bypass the security pitfalls and configuration complexities that put IoT deployments at risk,” said Todd Greene, founder & CEO of PubNub. PubNub will team with Atmel at CES 2015 to launch full SDK support for Atmel’s MCU, MPU, and Wireless SoC platforms. Atmel developers now have access to PubNub’s secure Publish/Subscribe messaging with guaranteed ¼ second latencies across PubNub’s 14 global points-of-presence. PubNub delivers secure communication through firewalls, proxy ser...
Jan. 31, 2015 12:45 PM EST Reads: 1,784
We’re no longer looking to the future for the IoT wave. It’s no longer a distant dream but a reality that has arrived. It’s now time to make sure the industry is in alignment to meet the IoT growing pains – cooperate and collaborate as well as innovate. In his session at @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, will examine the key ingredients to IoT success and identify solutions to challenges the industry is facing. The deep industry expertise behind this presentation will provide attendees with a leading edge view of rapidly emerging IoT oppor...
Jan. 31, 2015 12:45 PM EST Reads: 1,959
The 3rd International Internet of @ThingsExpo, co-located with the 16th International Cloud Expo - to be held June 9-11, 2015, at the Javits Center in New York City, NY - announces that its Call for Papers is now open. The Internet of Things (IoT) is the biggest idea since the creation of the Worldwide Web more than 20 years ago.
Jan. 31, 2015 12:00 PM EST Reads: 8,152
Connected devices and the Internet of Things are getting significant momentum in 2014. In his session at Internet of @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, examined three key elements that together will drive mass adoption of the IoT before the end of 2015. The first element is the recent advent of robust open source protocols (like AllJoyn and WebRTC) that facilitate M2M communication. The second is broad availability of flexible, cost-effective storage designed to handle the massive surge in back-end data in a world where timely analytics is e...
Jan. 31, 2015 12:00 PM EST Reads: 2,795
"There is a natural synchronization between the business models, the IoT is there to support ,” explained Brendan O'Brien, Co-founder and Chief Architect of Aria Systems, in this SYS-CON.tv interview at the 15th International Cloud Expo®, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Jan. 31, 2015 11:45 AM EST Reads: 3,701
The Internet of Things will put IT to its ultimate test by creating infinite new opportunities to digitize products and services, generate and analyze new data to improve customer satisfaction, and discover new ways to gain a competitive advantage across nearly every industry. In order to help corporate business units to capitalize on the rapidly evolving IoT opportunities, IT must stand up to a new set of challenges. In his session at @ThingsExpo, Jeff Kaplan, Managing Director of THINKstrategies, will examine why IT must finally fulfill its role in support of its SBUs or face a new round of...
Jan. 31, 2015 11:45 AM EST Reads: 2,838
The BPM world is going through some evolution or changes where traditional business process management solutions really have nowhere to go in terms of development of the road map. In this demo at 15th Cloud Expo, Kyle Hansen, Director of Professional Services at AgilePoint, shows AgilePoint’s unique approach to dealing with this market circumstance by developing a rapid application composition or development framework.
Jan. 31, 2015 11:30 AM EST Reads: 2,391
ARMONK, N.Y., Nov. 20, 2014 /PRNewswire/ -- IBM (NYSE: IBM) today announced that it is bringing a greater level of control, security and flexibility to cloud-based application development and delivery with a single-tenant version of Bluemix, IBM's platform-as-a-service. The new platform enables developers to build ap...
Jan. 31, 2015 11:15 AM EST Reads: 3,308
An entirely new security model is needed for the Internet of Things, or is it? Can we save some old and tested controls for this new and different environment? In his session at @ThingsExpo, New York's at the Javits Center, Davi Ottenheimer, EMC Senior Director of Trust, reviewed hands-on lessons with IoT devices and reveal a new risk balance you might not expect. Davi Ottenheimer, EMC Senior Director of Trust, has more than nineteen years' experience managing global security operations and assessments, including a decade of leading incident response and digital forensics. He is co-author of t...
Jan. 31, 2015 11:00 AM EST Reads: 3,435
Building low-cost wearable devices can enhance the quality of our lives. In his session at Internet of @ThingsExpo, Sai Yamanoor, Embedded Software Engineer at Altschool, provided an example of putting together a small keychain within a $50 budget that educates the user about the air quality in their surroundings. He also provided examples such as building a wearable device that provides transit or recreational information. He then reviewed the resources available to build wearable devices at home including open source hardware, the raw materials required and the options available to power s...
Jan. 31, 2015 11:00 AM EST Reads: 2,540
The Internet of Things is not new. Historically, smart businesses have used its basic concept of leveraging data to drive better decision making and have capitalized on those insights to realize additional revenue opportunities. So, what has changed to make the Internet of Things one of the hottest topics in tech? In his session at @ThingsExpo, Chris Gray, Director, Embedded and Internet of Things, discussed the underlying factors that are driving the economics of intelligent systems. Discover how hardware commoditization, the ubiquitous nature of connectivity, and the emergence of Big Data a...
Jan. 31, 2015 10:45 AM EST Reads: 3,313
The Internet of Things promises to transform businesses (and lives), but navigating the business and technical path to success can be difficult to understand. In his session at @ThingsExpo, Sean Lorenz, Technical Product Manager for Xively at LogMeIn, demonstrated how to approach creating broadly successful connected customer solutions using real world business transformation studies including New England BioLabs and more.
Jan. 31, 2015 10:45 AM EST Reads: 2,756
We certainly live in interesting technological times. And no more interesting than the current competing IoT standards for connectivity. Various standards bodies, approaches, and ecosystems are vying for mindshare and positioning for a competitive edge. It is clear that when the dust settles, we will have new protocols, evolved protocols, that will change the way we interact with devices and infrastructure. We will also have evolved web protocols, like HTTP/2, that will be changing the very core of our infrastructures. At the same time, we have old approaches made new again like micro-services...
Jan. 31, 2015 10:30 AM EST Reads: 2,613
Enthusiasm for the Internet of Things has reached an all-time high. In 2013 alone, venture capitalists spent more than $1 billion dollars investing in the IoT space. With "smart" appliances and devices, IoT covers wearable smart devices, cloud services to hardware companies. Nest, a Google company, detects temperatures inside homes and automatically adjusts it by tracking its user's habit. These technologies are quickly developing and with it come challenges such as bridging infrastructure gaps, abiding by privacy concerns and making the concept a reality. These challenges can't be addressed w...
Jan. 31, 2015 10:00 AM EST Reads: 3,272
The Domain Name Service (DNS) is one of the most important components in networking infrastructure, enabling users and services to access applications by translating URLs (names) into IP addresses (numbers). Because every icon and URL and all embedded content on a website requires a DNS lookup loading complex sites necessitates hundreds of DNS queries. In addition, as more internet-enabled ‘Things' get connected, people will rely on DNS to name and find their fridges, toasters and toilets. According to a recent IDG Research Services Survey this rate of traffic will only grow. What's driving t...
Jan. 31, 2015 10:00 AM EST Reads: 3,274