Click here to close now.




















Welcome!

Cloud Security Authors: Ian Khan, Cloud Best Practices Network, Liz McMillan, Tim Hinds, Pat Romanski

Related Topics: @CloudExpo, Microservices Expo, Linux Containers, Open Source Cloud, Agile Computing, Cloud Security

@CloudExpo: Article

Open Source PaaS for Parallel Cloud Application Development

Architectural advantages of cross-layer optimized parallel computing PaaS

Improving application program performance will require parallelizing the program execution at ever finer granularity now that the processor clock rates are no longer increasing. However, even in a per-application dedicated computing environment, the parallelization overhead is known to place a limit on how much application on-time throughput performance increase can be achieved via higher levels of parallel processing. The throughput-limiting impact of parallelization overhead will be significantly amplified when executing multiple internally parallelized applications on dynamically shared cloud computing environment, since the allocation of processing resources to instances and tasks of any given application cannot be done in isolation, but instead it needs to be done collectively across all the applications dynamically sharing the given pool of computing resources. There thus is an urgent need to solve this complex challenge of developing internally parallelized programs for dynamic execution on shared cloud computing infrastructure, if we expect to be able scale the performance and capacity of cloud hosted applications going forward.

PaaS Approach for Parallel Cloud Computing Challenges
The Need for Cross-layer Optimized Platform

For effectiveness of a parallel cloud computing platform, what is essential is how well the platform elements perform together, rather than individually. Consequently, the complex, interleaved challenges of parallel cloud application development and execution cannot be solved by any single layer or element of traditional computing architectures alone. Instead, a comprehensive, cross-layer optimized platform architecture is needed.

This new platform architecture will involve a parallel program development environment for producing application executables based on actors that can be efficiently mapped for concurrent execution on processing cores of dynamically shared manycore arrays. In addition, the parallel cloud computing platform will need an execution environment that, besides executing the program instructions on processing cores, takes care of the dynamic parallel execution routines on behalf of the applications, so that the processing cores are used for executing the actual client programs instead of system functions. If the hardware of the manycore processor fabric did not handle the parallel execution routines[1], eventually the system would be just managing itself rather than providing increased user application throughput as the numbers of processing cores and applications and tasks sharing them are scaled up. This difference in enabling application on-time throughput scalability is illustrated at Figures 4 and 5 (in Ch. 3 Architectural Advantages of Cross-layer Optimized Parallel Computing PaaS).

The Platform Architecture
Vision

Figure 1 below illustrates the overall architecture of the envisioned open parallel program development and execution platform as a service (PaaS).

Figure 1: Overview of the parallel cloud computing PaaS

As illustrated in Figure 1, the open parallel computing PaaS has an open-sourced parallel program development environment and a dynamic parallel execution environment. The development environment allows the platform users to produce executables of their application programs that are made of segments (tasks/actors/threads) that can execute concurrently on parallel (incl. pipelined) processing cores. The execution environment provides, besides an array of processing cores for parallel execution of the user program tasks, the capabilities to dynamically map the highest-priority ready application task instances for execution on their assigned cores. While the state (e.g. which application task instance is mapped to any given core of the shared resource pool at any given time) of the execution environment is highly dynamic during the application runtime, in the platform architecture per Figure 1, the execution environment provides for the application programs (and their developers) a virtual static view of it; any given application can assume that each of its task instances is always active and mapped to a virtual static core in an array that is virtually dedicated to that single application. The hardware automated parallel processing runtime routines of the execution environment per Figure 1 hide (to the desired level) the dynamic details of the processing hardware from the applications as well as the development environment software, thereby providing a higher level, simplified abstraction of the execution environment for the software. The raised level of the software-hardware interface per Figure 1 enables greater productivity for both realizing the much needed open, comprehensive parallel programming environment as well as for developing parallelized applications for cloud deployment, as software does not need to be concerned of the dynamic parallel execution details.

Motivation
Importantly, there is the need to coordinate the various development activities concerning parallel programming and cloud computing tools etc. base technologies (e.g. languages, compilers, parallel file systems, data bases, etc.) around a common overall framework so that the individual technology elements work efficiently together, to enable high productivity development of parallelized applications for cloud deployment. ThroughPuter proposes that the elevated level of the interface to the parallel execution environment per the platform architecture of Figure 1 provides a compelling motive for why the software technology development activities for parallel cloud computing should be based on this execution environment model. More specifically, the major reasons for software ecosystem for parallel computing platform to be based on the dynamic parallel execution environment interface standard per figure include:

  1. Greater productivity through less low-level work: The execution environment in the platform architecture per Figure 1 automates dynamic parallel execution routines in (programmable) hardware, providing higher level application development interface for the software of the PaaS.
  2. Higher performance and scalability via eliminating system software overhead by hardware automation of system tasks such as optimally allocating processing core capacity, scheduling and placing application tasks for execution, inter-task communications, billing etc.
  3. Built-in cloud computing security from the hardware level up: unauthorized interactions between different applications simply not enabled in the hardware.
  4. Open source software and open standard interface between development and execution environment: users have full freedom to choose where to host the development environment as well as the parallelized application executables produced by it. Any execution environment implementation complying to the simple, open execution environment interface standard per Figure 1 is a possible hosting option so there is nothing vendor specific about this platform architecture, and users will not suffer from vendor lock-in.

Technical Overview
Application software developers access the envisioned open parallel cloud computing PaaS through its Integrated Development Environment (IDE) to build application software optimized for parallel processing on dynamically shared cloud processors. The IDE provides a web-based program flow chart, code advisor, profiler etc. (GUI) tools to assist and automate parallelizing the users' programs. The IDE also includes the automated back-end development tool chain, incl. compiler, linker and loader programs, for building and executing the user's parallelized application in a processing hardware complying to the discussed execution environment interface standard per Figure 1. The IDE further equips the user application programs with the system software that automates and optimizes the minimal (to none) interactions between the user programs and the hardware operating system of the dynamic parallel execution environment of the parallel cloud computing PaaS[2].

The IDE software can be hosted with the same parallel computing PaaS as the applications it produces. This practice avoids the need for cross-compiling, and enables straightforward and rapid-cycle interactive testing, debugging and optimization of the parallelized application programs, as well as deployment and scaling releases of the user applications.

The software of the parallel cloud computing PaaS is developed and made fully available as an open-source project, and can be integrated with popular open-source IDEs. In essence, this software project is to add the parallel programming development tools to the major open source IDE and PaaS code bases, while utilizing (and further developing) the applicable existing features from them.

The openness of the promoted comprehensive parallel cloud computing PaaS, besides the open-source IDE, is also manifested via the simple, open standard interface between the development and execution environments of the PaaS architecture. This open standard interface enables any user to host the IDE as well as the parallel program executables produced by it anywhere, e.g. at the user premises, or with ThroughPuter or any 3rd party. Alternative I/PaaS providers furthermore are encouraged to support the execution/development environment interface via their respective implementations of either side or both sides of that interface. The customizable, open-source IDE and open-standard interface to the execution environment provides the users and collaborators a flexible and productive way to approach the major, must-solve parallel cloud application development and execution challenge that is facing much of the software industry and its customers.

The efficient dynamic parallel processing features - which will be critically needed as user application throughput requirements begin exceeding what is available from conventional sequential execution models, and as the parallelized applications will be cloud hosted -- of this open-source software based PaaS are delivered by an execution environment that provides the necessary, dynamic parallel execution core to application task instance allocation, task instance to core assignment, and inter-task communication capabilities. These critical parallel execution capabilities are an integrated feature in the ThroughPuter hosted commercial PaaS offering.

For reference on ThroughPuter's implementation of the dynamic parallel execution environment for the open parallel computing PaaS architecture per Figure 1, the below Figure 2 shows ThroughPuter's realtime application load adaptive manycore processor architecture, highlighting its hardware logic automated operating system functionality enabling a number of customer application programs to securely, dynamically and cost-efficiently share the processing capacity of the manycore processor hardware.

Figure 2: Reference diagram for ThroughPuter manycore processors with hardware-automated multi-user parallel processing optimized operating system.

ThroughPuter's hardware operating system, manycore fabric memory and I/O subsystems are largely responsible for the architectural security, performance and cost-efficiency benefits of the ThroughPuter PaaS. However, the IDE hides the actual execution environment features from the user; the user does not need to be aware of the novel hardware-implemented capabilities of this dynamic parallel execution environment in order to realize the performance benefits.

A possible core to application task/instance allocation scenario over a few core allocation periods (CAPs) is illustrated in Figure 3 below, along with associated highlights of the feature benefits.

Figure 3: Dynamic core to application task instance assignment scenario in the execution environment of the PaaS per Figure 1.

In reference to the dynamic core assignment scenario per Figure 3, it shall be remembered that in the PaaS architecture per Figure 1, the software does not need to be aware of the dynamic parallel execution matters, but can instead maintain a virtual static view of the execution environment where each possible application task instance is constantly mapped to its virtual dedicated core, thus simplifying both the development environment as well as the application software while improving the development productivity and runtime performance.

Architectural Advantages of Cross-layer Optimized Parallel Computing PaaS
The platform model presented here is crucial for enabling application on-time throughput performance scalability in the age of parallel cloud computing, as illustrated in Figures 4 and 5.

Figure 4: Scalability problem in parallel cloud computing due to the system software overhead.

As illustrated in Figure 4, when relying on system software for managing the parallel execution, there is a limit to scalability of cloud computing platforms in the parallel processing era, as application performance improvement begins requiring ever finer grades of intra-application parallelism (i.e. more tasks and task instances per application). This is due to that the parallel processing system software overhead (the need to dynamically coordinate and manage concurrent tasks and parallel processing resources) increases with the number of applications as well as their tasks and instances, and the number of processing cores being dynamically shared among them. When relying on system software to handle parallel execution routines, the processing capacity of a given manycore processor (array) is split between processing user applications and system software, with the rate of system software increasing with scale, at the expense of the user applications. This causes that after some point, the system-wide application processing on-time throughput (the product of number of cores and the percentage of the cores' processing capacity available for user applications) will begin decreasing as the system is scaled up (by adding processing cores and parallelized applications and their tasks sharing the cores).

To solve this fundamental challenge affecting the scalability of cloud computing in the parallel processing era, the processing hardware needs to raise up to this challenge and handle the parallel processing routines in the hardware of the manycore processors, so that the processing cores will be optimally used for processing the user applications (rather than for processing the system functions, and/or be locked to low utilization due to non-load-adaptive allocation).

The impact of the hardware automation of the parallel processing system functions in the hardware of manycore processors per Figures 1-3 is illustrated in Figure 5 below.

Figure 5: Scalability solution for parallel cloud computing delivered via automating the parallel execution system functions in hardware.

The enabling of scalability of cloud computing platforms and cloud applications' on-time processing throughput in the emerging era of (inter and intra) application parallel processing by the execution environment model per Figure 1 serves as a further compelling reason for concentrating the efforts to address the popular parallel programming challenge via the herein presented open parallel cloud computing platform model. Parties interested in collaboration to realize this much needed comprehensive, open source parallel cloud computing platform can contact ThroughPuter via [email protected].

Further Reading
Relevant further material on the parallel program development and execution challenges is available at:

References:

  1. These include: monitoring application processing load demands, periodically allocating processing resources (cores) among the applications based on their processing load variations and contractual entitlements, prioritizing and selecting application task instances for execution, mapping selected task instances for execution on their assigned cores and accordingly configuring the IO and memory access subsystems, arranging the inter task communications, plus contract billing based on applications' resource entitlement and usage.
  2. These interactions are mainly limited to the application program, via the PaaS tool-generated system software, providing to the hardware operating system of the execution environment (per Figure 1) a listing of its schedulable tasks/instances in their priority order; there is very little overhead in interacting with such hardware operating system. Where applicable, the hardware operating system of the PaaS is able to deduce the processing core demands and task/instance priority orders of the applications by itself by monitoring the input processing data load levels for the applications. This feature, where employed for a given application (or task group), will effectively eliminate all the parallelization system software overhead for the given application (task group).

More Stories By Mark Sandstrom

Mark Sandstrom is the president of ThroughPuter, Inc., developer of dynamic parallel program execution technologies with a business model of PaaS provider. He is an innovator and strategist with experience in the high technology industry since 1995, including at Optimum Communications Services, Inc., Turin Networks, Inc. (acquired by Force 10, then by Dell), Cyras Systems, Inc. (acquired by CIENA) and Tellabs, Inc.

Sandstrom holds an MSEE degree from Helsinki University of Technology and Executive MBA from Golden Gate University, and has been granted sixteen US and UK patents in fields of networking and computing system throughput optimization and management system streamlining.

Comments (0)

Share your thoughts on this story.

Add your comment
You must be signed in to add a comment. Sign-in | Register

In accordance with our Comment Policy, we encourage comments that are on topic, relevant and to-the-point. We will remove comments that include profanity, personal attacks, racial slurs, threats of violence, or other inappropriate material that violates our Terms and Conditions, and will block users who make repeated violations. We ask all readers to expect diversity of opinion and to treat one another with dignity and respect.


@ThingsExpo Stories
As more intelligent IoT applications shift into gear, they’re merging into the ever-increasing traffic flow of the Internet. It won’t be long before we experience bottlenecks, as IoT traffic peaks during rush hours. Organizations that are unprepared will find themselves by the side of the road unable to cross back into the fast lane. As billions of new devices begin to communicate and exchange data – will your infrastructure be scalable enough to handle this new interconnected world?
Through WebRTC, audio and video communications are being embedded more easily than ever into applications, helping carriers, enterprises and independent software vendors deliver greater functionality to their end users. With today’s business world increasingly focused on outcomes, users’ growing calls for ease of use, and businesses craving smarter, tighter integration, what’s the next step in delivering a richer, more immersive experience? That richer, more fully integrated experience comes about through a Communications Platform as a Service which allows for messaging, screen sharing, video...
SYS-CON Events announced today that Pythian, a global IT services company specializing in helping companies leverage disruptive technologies to optimize revenue-generating systems, has been named “Bronze Sponsor” of SYS-CON's 17th Cloud Expo, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. Founded in 1997, Pythian is a global IT services company that helps companies compete by adopting disruptive technologies such as cloud, Big Data, advanced analytics, and DevOps to advance innovation and increase agility. Specializing in designing, imple...
Contrary to mainstream media attention, the multiple possibilities of how consumer IoT will transform our everyday lives aren’t the only angle of this headline-gaining trend. There’s a huge opportunity for “industrial IoT” and “Smart Cities” to impact the world in the same capacity – especially during critical situations. For example, a community water dam that needs to release water can leverage embedded critical communications logic to alert the appropriate individuals, on the right device, as soon as they are needed to take action.
In his session at @ThingsExpo, Lee Williams, a producer of the first smartphones and tablets, will talk about how he is now applying his experience in mobile technology to the design and development of the next generation of Environmental and Sustainability Services at ETwater. He will explain how M2M controllers work through wirelessly connected remote controls; and specifically delve into a retrofit option that reverse-engineers control codes of existing conventional controller systems so they don't have to be replaced and are instantly converted to become smart, connected devices.
SYS-CON Events announced today that IceWarp will exhibit at the 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. IceWarp, the leader of cloud and on-premise messaging, delivers secured email, chat, documents, conferencing and collaboration to today's mobile workforce, all in one unified interface
WebRTC has had a real tough three or four years, and so have those working with it. Only a few short years ago, the development world were excited about WebRTC and proclaiming how awesome it was. You might have played with the technology a couple of years ago, only to find the extra infrastructure requirements were painful to implement and poorly documented. This probably left a bitter taste in your mouth, especially when things went wrong.
Too often with compelling new technologies market participants become overly enamored with that attractiveness of the technology and neglect underlying business drivers. This tendency, what some call the “newest shiny object syndrome,” is understandable given that virtually all of us are heavily engaged in technology. But it is also mistaken. Without concrete business cases driving its deployment, IoT, like many other technologies before it, will fade into obscurity.
While many app developers are comfortable building apps for the smartphone, there is a whole new world out there. In his session at @ThingsExpo, Narayan Sainaney, Co-founder and CTO of Mojio, will discuss how the business case for connected car apps is growing and, with open platform companies having already done the heavy lifting, there really is no barrier to entry.
SYS-CON Events announced today that HPM Networks will exhibit at the 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. For 20 years, HPM Networks has been integrating technology solutions that solve complex business challenges. HPM Networks has designed solutions for both SMB and enterprise customers throughout the San Francisco Bay Area.
Consumer IoT applications provide data about the user that just doesn’t exist in traditional PC or mobile web applications. This rich data, or “context,” enables the highly personalized consumer experiences that characterize many consumer IoT apps. This same data is also providing brands with unprecedented insight into how their connected products are being used, while, at the same time, powering highly targeted engagement and marketing opportunities. In his session at @ThingsExpo, Nathan Treloar, President and COO of Bebaio, will explore examples of brands transforming their businesses by t...
With the proliferation of connected devices underpinning new Internet of Things systems, Brandon Schulz, Director of Luxoft IoT – Retail, will be looking at the transformation of the retail customer experience in brick and mortar stores in his session at @ThingsExpo. Questions he will address include: Will beacons drop to the wayside like QR codes, or be a proximity-based profit driver? How will the customer experience change in stores of all types when everything can be instrumented and analyzed? As an area of investment, how might a retail company move towards an innovation methodolo...
The Internet of Things (IoT) is about the digitization of physical assets including sensors, devices, machines, gateways, and the network. It creates possibilities for significant value creation and new revenue generating business models via data democratization and ubiquitous analytics across IoT networks. The explosion of data in all forms in IoT requires a more robust and broader lens in order to enable smarter timely actions and better outcomes. Business operations become the key driver of IoT applications and projects. Business operations, IT, and data scientists need advanced analytics t...
As more and more data is generated from a variety of connected devices, the need to get insights from this data and predict future behavior and trends is increasingly essential for businesses. Real-time stream processing is needed in a variety of different industries such as Manufacturing, Oil and Gas, Automobile, Finance, Online Retail, Smart Grids, and Healthcare. Azure Stream Analytics is a fully managed distributed stream computation service that provides low latency, scalable processing of streaming data in the cloud with an enterprise grade SLA. It features built-in integration with Azur...
Akana has announced the availability of the new Akana Healthcare Solution. The API-driven solution helps healthcare organizations accelerate their transition to being secure, digitally interoperable businesses. It leverages the Health Level Seven International Fast Healthcare Interoperability Resources (HL7 FHIR) standard to enable broader business use of medical data. Akana developed the Healthcare Solution in response to healthcare businesses that want to increase electronic, multi-device access to health records while reducing operating costs and complying with government regulations.
For IoT to grow as quickly as analyst firms’ project, a lot is going to fall on developers to quickly bring applications to market. But the lack of a standard development platform threatens to slow growth and make application development more time consuming and costly, much like we’ve seen in the mobile space. In his session at @ThingsExpo, Mike Weiner, Product Manager of the Omega DevCloud with KORE Telematics Inc., discussed the evolving requirements for developers as IoT matures and conducted a live demonstration of how quickly application development can happen when the need to comply wit...
The Internet of Everything (IoE) brings together people, process, data and things to make networked connections more relevant and valuable than ever before – transforming information into knowledge and knowledge into wisdom. IoE creates new capabilities, richer experiences, and unprecedented opportunities to improve business and government operations, decision making and mission support capabilities.
Explosive growth in connected devices. Enormous amounts of data for collection and analysis. Critical use of data for split-second decision making and actionable information. All three are factors in making the Internet of Things a reality. Yet, any one factor would have an IT organization pondering its infrastructure strategy. How should your organization enhance its IT framework to enable an Internet of Things implementation? In his session at @ThingsExpo, James Kirkland, Red Hat's Chief Architect for the Internet of Things and Intelligent Systems, described how to revolutionize your archit...
MuleSoft has announced the findings of its 2015 Connectivity Benchmark Report on the adoption and business impact of APIs. The findings suggest traditional businesses are quickly evolving into "composable enterprises" built out of hundreds of connected software services, applications and devices. Most are embracing the Internet of Things (IoT) and microservices technologies like Docker. A majority are integrating wearables, like smart watches, and more than half plan to generate revenue with APIs within the next year.
Growth hacking is common for startups to make unheard-of progress in building their business. Career Hacks can help Geek Girls and those who support them (yes, that's you too, Dad!) to excel in this typically male-dominated world. Get ready to learn the facts: Is there a bias against women in the tech / developer communities? Why are women 50% of the workforce, but hold only 24% of the STEM or IT positions? Some beginnings of what to do about it! In her Opening Keynote at 16th Cloud Expo, Sandy Carter, IBM General Manager Cloud Ecosystem and Developers, and a Social Business Evangelist, d...